{11 Measures to Spray Paint Your car or truck just like the Professionals - Car Bodywork Paint Repair

11 Steps to Spray Paint Your own car just like the Professionals - Automobile Bodywork Paint Repair

You'll be amazed to find just how you can spray on car paint actually might not be difficult. That does not mean you could simply catch a tin of paint and go at it. There are some basics you need to know. Both in the preparation and use.

Measure A:

Prepare by gathering all your items that you're going to need. Be sure that your surrounding area is protected against any potential through aerosol. Any parts which do not have to be sprayed and that could be removed then do thus. For other places masking tape and cover nicely with paper.

Measure B:

You'll need to analyze the vehicle carefully for any rough spots. These need to be sanded with 300 grit sand paper. In addition, it allows the spray automobile paint to stick better. When you have finished sanding, make sure all the dust dirt and debris are taken from the car. It is imperative the auto be perfectly clean.

Step C:

You'll have to apply a primer. This is going to ensure that you get an overall even coating of your coloured paint car scratch repair Manchester plus helps the paint to stick well. How to spray car paint takes a little getting used to.

Step D:

Now you are pretty well to the point at which you're about prepared to spray the color. You might have chosen to utilize the spray car paint that comes in aerosol cans, or maybe you might have selected for the spray gun. Either way, make a few practice strokes on an item before you start with the vehicle. When you are ready, begin the passes with the paint without hesitation. If it happens you've got a major repair job on your had. You will probably have instructions about the best way to spray auto paint using spray cans or the gear.

Step E:

It's up to you whether you would like to wet sand between coats of color and primer paints. You may want to research this option on the web, or check with someone that is comfortable with the way to spray auto paint

Step F:

Once you are absolutely satisfied using the colour, you're down to the finishing touches. You'll now desire to apply several coats that are clear. This will provide the gloss and finished appearance to the vehicle in addition to protect the finish. It's going to be your responsibility although likely two layers will be adequate. Make absolutely sure it is dry in between coats.



Step G:

Yet again, you have the possibility of wet sanding in case you would like. Again, it is best to ask the help of people that are familiar with how to spray paint a vehicle. You should wet sand with all the following grits in this arrangement if you choose to follow this measure then. Use 800, 1000, 1200, 1500 and the finally the 2000. This can remove spots which may not be overly light in the clear coating application.

Measure H:

Now you'll want to using a rubbing compound to buff the surface so you may use a 2000 grit to eliminate any scratches.

Step I:

You ought to buff the surface. To do that simply use a medium cut polish. Once this has been done by you, you must have a glassy look that is perfect to the finish.

Step J:

As a final touch, you may want to apply a couple of coats of wax.